0.8N - 1.2N Glow Wire Test Equipment For Plastic Parts / Non-Metallic Insulation Parts
Overview:
Electrical parts or parts in the failure or overload conditions, may reach high temperatures or
ignite their nearby parts, glow-wire test Simulation of hot components or overload resistance of
the heat source or ignition source in a short time caused by heat Stress, the use of simulation
technology to assess the risk of fire. Glow wire test for electrical and electronic products,
household electrical appliances used in plastic parts and non-metallic insulation parts, such as:
switch shell; relays, sockets ... ....
Model number
According to the standard box volume m3
Dimensions
skills requirement
Remarks
WH-8901B
IEC60695, IEC335 related standards 0.5
In this case,1000 (W) × 600 (D) × 1260 (H)
1, Glowing wire temperature adjustable in the range of 500 ~ 10000 ℃, the temperature
tolerance: 500 ~ 750 ℃ ± 10 ℃;750 ~ 1000 ℃ ± 15 ℃, temperature measuring instrument
accuracy ± 0.5 level. Temperature measurement using 0.5 ~ 0.55 mm, ¢ 1mm nickel-chromium
armored (K type) imported thermocouple.
2, glowing wire on the sample exert force 0.8N ~ 1.2N
3 and limit the penetration depth to at least 7 mm
(Ta) 0 ~ 99 minutes and 99 seconds adjustable, generally according to standard requirements
set to 30 seconds, and have measured the ignition duration (Ti) and flame out time (Te) of the
Timer; time error ± 1S.
5, the instrument is simple, temperature measurement system is stable and reliable, 
